Your estimated area
Areas are rounded to two decimal places for display. The two figures are the same area expressed in the two units.
Free tool · Canada · Estimate only
Enter the length and width of a rectangular space, in feet or metres, to see its area in square feet and in square metres. This is an estimate only — plain arithmetic on the numbers you enter, for a rectangle. It is not a measurement of any real space.
Written November 17, 2026
The long side of the space, in the unit you pick below.
The short side of the space, in the same unit as the length.
Both measurements must be in this one unit. The result always shows the area in both square feet and square metres.
Areas are rounded to two decimal places for display. The two figures are the same area expressed in the two units.
The formula. Area = length × width. The conversion used is 1 square metre = 10.7639 square feet. If you enter feet, the area in square feet is length × width, and the area in square metres is that figure ÷ 10.7639. If you enter metres, the area in square metres is length × width, and the area in square feet is that figure × 10.7639. If the length or the width is zero or less, no area exists and the page says so instead of showing one.
Assumptions printed. The result uses exactly the numbers you entered, treats the space as a rectangle, and adds nothing for waste or unusable corners.
Sources: No external figure is used on this page beyond the unit conversion stated above. Every other number in the result comes from the numbers you enter and the formula above.