Enter a wall's length and height, how many walls of that size you are painting, the number of coats, and the coverage per litre to see the total wall area and how many litres of paint the coats need. Every figure is plain arithmetic on the numbers you enter. This is an estimate only. It is not advice.
Written November 19, 2026
The coverage starts at 100 square feet per litre. Change it to the coverage printed on the paint you are using — coverage varies, and this page does not state any paint's coverage for you.
Your estimated wall area and paint needed
The area covers the full walls you measured, with nothing taken off for doors, windows or trim. If you are not painting part of a wall, measure and enter only the part you are painting. Rough, unprimed or strongly contrasting surfaces can take more paint than the arithmetic suggests.
How the estimate works
The formulas. Total wall area in square feet = wall length in feet × wall height in feet × number of walls. Total wall area in square metres = total wall area in square feet × 0.092903. Paint needed in litres = total wall area in square feet × number of coats ÷ coverage in square feet per litre. If the length, height, number of walls, number of coats or coverage is zero or less, no result exists and the page says so instead of showing one.
Assumptions printed. The result uses exactly the length, height, wall count, coats and coverage you entered, treats every wall as the same size, takes nothing off for openings, and adds nothing for waste.
Sources: No external figure is used on this page, apart from the fixed conversion 1 square foot = 0.092903 square metres. Every other number in the result comes from the numbers you enter and the formulas above.
Get new guides by email
One short email when a new Canadian startup guide publishes. No spam — unsubscribe anytime.