Medical laboratory technologists are not yet regulated in British Columbia: today the credential is CSMLS or CAMLPR certification under the CPSBC Diagnostic Accreditation Program, and CPSBC licensing starts November 29, 2027 under Ministerial Order No. M220.
Written November 17, 2026
The short answer
British Columbia does not regulate medical laboratory technologists (MLTs) yet — there is no licence to apply for today, and regulation starts on November 29, 2027. The BC Society of Laboratory Science (BCSLS) states that on July 16, 2025, Minister of Health Josie Osborne signed Ministerial Order No. M220, officially regulating MLTs under the Medical, Diagnostic and Therapeutic Professionals Regulation, effective November 29, 2027, and the Province's health profession regulation page lists medical laboratory technologists (2027) under the College of Physicians and Surgeons of BC (CPSBC). Until then, the working credential is certification: the CPSBC Diagnostic Accreditation Program policy, effective April 1, 2026, states that staff performing MLT duties must be certified with the Canadian Society for Medical Laboratory Science (CSMLS), be eligible for CSMLS certification and a recent graduate of an approved program, or be certified with the Canadian Alliance of Medical Laboratory Professionals Regulators (CAMLPR). The education-and-examination route below is the CAMLPR route the BCSLS Working in a BC Lab page sets out.
Step 1: Understand the two dates that govern this profession in BC
Two facts decide everything else. First, today there is no BC regulatory college for MLTs: the Diagnostic Accreditation Program policy states that, in British Columbia, due to an absence of a regulatory college of MLTs and MLAs, the DAP accreditation standards have incorporated credentialing requirements for each role, and facility leadership is responsible for assigning scope of services commensurate with a person's education and credentials. Second, that changes on a fixed date: the Province's regulation page states that the Health Professions and Occupations Act replaced the Health Professions Act on April 1, 2026, and its college table places medical laboratory technologists, marked (2027), with the College of Physicians and Surgeons of BC. Plan your education and examinations against the November 29, 2027 start, not against a licence you can hold today.
Step 2: Complete the education for your pathway
The BCSLS Working in a BC Lab page states that to work as a medical laboratory technologist in Canada, all applicants must demonstrate that they have the necessary education and recent clinical experience and have passed the required entry-to-practice examinations, and that British Columbia recognizes CAMLPR as the national body responsible for setting the national competency profile for MLTs and administering prior learning assessments and fields-of-practice competency assessments (examinations). CAMLPR's Flexible Pathways to Registration program has three pathways:
- Educated in a Canadian medical laboratory technology program (effective March 1, 2026) — for graduates of a CAMLPR-approved Canadian program. In British Columbia the two CAMLPR-approved programs are the BCIT MLT program in Burnaby and the College of New Caledonia MLT program in Prince George. If you are completing a Canadian program before March 1, 2026, the page directs you to consult your program.
- Educated internationally (effective November 1, 2025) — CAMLPR conducts a Prior Learning Assessment of your education to confirm it is comparable to a CAMLPR-approved program before you can register for the fields-of-practice examinations.
- Non-traditionally educated in a related field (effective November 1, 2025) — for people whose credential is in a related field of study, such as a BSc, MSc or PhD; the same Prior Learning Assessment applies.
Step 3: Pass the entry-to-practice examinations
On the CAMLPR route, you register for the CAMLPR fields-of-practice examinations once your pathway makes you eligible — directly as a graduate of an approved Canadian program, or after a Prior Learning Assessment on the international and related-field pathways. Separately, CSMLS certification remains a working credential in BC laboratories today: the DAP credentialing policy accepts a person performing MLT duties who is certified with CSMLS, or who is eligible for CSMLS certification and graduated from an approved MLT program within the last 24 months, or who has completed CAMLPR certification and performs only activities in which they have been certified. Which examination set you need depends on when and where you will work, and the transition rules in Step 5 — read them before choosing.
Step 4: Work in BC under the current credentialing rules
Until November 29, 2027, there is no college register to join and no BC licence fee to pay for this profession. Your employer works within the Diagnostic Accreditation Program's accreditation standards, which carry the credentialing requirements above. The BCSLS is the provincial professional society — it advocates for the profession, provides education, and maintains a database of members so that, with your permission, it can verify your credentials to employers — but BCSLS membership is not a licence, and its certification program described on the Working in a BC Lab page is for medical laboratory assistants, not technologists.
Step 5: Get licensed with CPSBC from November 29, 2027
CPSBC's FAQ for students states that once regulation takes effect on November 29, 2027, you will be required to hold the appropriate CPSBC licence if you plan to begin practising medical laboratory technology in BC, and that a person still completing their education on that date will need to meet the applicable licensing requirements after completing their education before obtaining a licence. Its general FAQ adds the transition provision: the draft CPSBC Bylaws allow a person who is practising in BC as a medical laboratory technologist immediately prior to the effective date of regulation, and who has provided information and records satisfactory to the registrar, to be licensed in the appropriate class as a legacy applicant. For legacy applicants, CSMLS examinations will be accepted once verified, with no additional examinations; new, non-legacy applicants will be required to complete the CAMLPR examinations. The general FAQ also states that continuing education will be required to maintain licensure under the draft Bylaws, with a supporting policy in place for November 29, 2027, and that the regulation of MLTs by CPSBC was legislated by the government of BC through Ministerial Order No. 220. If you start working in BC before November 29, 2027 after being educated outside BC, the student FAQ states you can apply for licensure through the transition phase and CPSBC would recognize credentials obtained outside BC; starting on or after that date, you must meet the applicable CPSBC licensing requirements.
What the opened pages do not state
The pages opened for this guide state the current credentialing rules, the CAMLPR pathways and program names, and the November 29, 2027 regulation date. They do not state a dollar amount for any CPSBC application or licence fee — the CPSBC general FAQ says only that the draft licensure fees were based on a scan of fees in Canadian jurisdictions where the professions are regulated — do not state CSMLS or CAMLPR examination fees, do not state BCSLS membership fees for technologists, and do not state a final list of CPSBC licence classes or application forms, because the Bylaws described are still in draft. This guide gives none of those figures.
Questions people ask
Are medical laboratory technologists regulated in British Columbia?
Not yet. The College of Physicians and Surgeons of British Columbia's Diagnostic Accreditation Program policy, effective April 1, 2026, states that in British Columbia, due to an absence of a regulatory college of MLTs and MLAs, its accreditation standards carry the credentialing requirements. Regulation is coming: the BC Society of Laboratory Science states that on July 16, 2025, Minister of Health Josie Osborne signed Ministerial Order No. M220, officially regulating MLTs under the Medical, Diagnostic and Therapeutic Professionals Regulation, effective November 29, 2027, and the Province's health profession regulation page lists medical laboratory technologists (2027) under the College of Physicians and Surgeons of BC.
What credential do I need to work as an MLT in BC today?
Under the Diagnostic Accreditation Program policy, staff performing duties as a medical laboratory technologist must be certified with the Canadian Society for Medical Laboratory Science (CSMLS), or be eligible for CSMLS certification and have graduated from an approved MLT program within the last 24 months, or complete certification with the Canadian Alliance of Medical Laboratory Professionals Regulators (CAMLPR) and perform only activities in which they have been certified.
Where can I study medical laboratory technology in British Columbia?
The BC Society of Laboratory Science's Working in a BC Lab page states that British Columbia offers two CAMLPR-approved medical laboratory technology programs: the BCIT MLT program in Burnaby, and the College of New Caledonia MLT program in Prince George. It states that either program will provide the education and clinical experience you need to be eligible to register for the CAMLPR fields-of-practice examination.
I trained outside Canada. What is my route?
The international pathway, effective November 1, 2025, is for people who completed a medical laboratory technology or science program outside Canada. CAMLPR will conduct a Prior Learning Assessment of your education to confirm that it is comparable to a CAMLPR-approved program before you can register for the CAMLPR fields-of-practice examinations. A third pathway, also effective November 1, 2025, covers people educated in a related field, such as a BSc, MSc or PhD, through the same Prior Learning Assessment.
Will my CSMLS examinations count when CPSBC licensing starts?
For legacy applicants, yes. The College of Physicians and Surgeons of British Columbia's student FAQ states that the draft CPSBC Bylaws contain a transition provision for legacy applicants who were practising as medical laboratory technologists in BC immediately before the effective date of regulation: if that pathway applies to you, your CSMLS examinations will be accepted once verified, and you will not be required to complete additional examinations. New, non-legacy applicants will be required to complete the CAMLPR examinations.
Do students and medical laboratory assistants need a CPSBC licence?
Students do not need a licence for the clinical components of their education program, but once regulation takes effect on November 29, 2027, a graduate must hold the appropriate CPSBC licence to begin practising medical laboratory technology in BC. Medical laboratory assistants and combined laboratory and X-ray technologists will not be regulated in BC as of November 29, 2027.